-
Agricultural Machinery Parts
- Engine System Parts
- Transmission System Parts
- Hydraulic System Parts
- Electrical System Parts
- Braking & Steering Systems Parts
- Pneumatic & Suspension System Parts
- Working Device Parts
- Driving System Parts
- Seals, Gaskets & O-rings
- Bearings&Bushings
- Construction & Mining Machinery Parts
- Truck Machinery Parts
- Material Handling Equipment (MHE) Parts
- Other Auto Parts
U5MW0160 Perkins 1000 SERIES WATER PUMP Replacement Cooling Pump for 1006-60T, 1006-6T, 1006e-6T, Fed. CC
U5MW0160 Water Pump Replacement Part features an integrated assembly design with OEM-matched flow and pressure specifications, meeting the cooling requirements of Perkins 1006 series engines. Direct replacement for old part number 1016102, combining high reliability with easy installation. Ideal for demanding applications requiring continuous equipment operation, effectively preventing engine overheating, shutdowns, and component damage caused by pump failure.
Water pump is a simple centrifugal pump, often belt driven from the crankshaft to circulate coolant fluid whenever the engine is running, pushing the fluid from the pump into the engine. Common signs of wear include coolant leaks, overheating of the engine, the pulley is loose and making whining sounds, or worst case steam coming from the engine. Perkins water pumps are designed to meet the flow and pressures within the engine using high-quality ceramic cartridge seals and sealed bearings, and undergo extensive testing to ensure coolant flow and pressures match the engine requirements. Typically Perkins water pumps are supplied with gasket kits.
| Part Name | Water Pump | Part Number | U5MW0160 |
| Compatible Brand | Perkins | Purpose | Repair/replace/aftermarket |
| Condition | Brand new | Drive Mode | Gear/belt drive |
| Operating Temperature | -30℃ to 120℃ | Installation Interface | Same as original pump |
| Structure Type | Centrifugal water pump, integrated with pump casing, impeller, ceramic seal assembly, bearing assembly, and mounting flange. | ||
| Compatible Engine | Perkins 1000 Series: 1006-60T, 1006-6T, 1006e-6T, Fed. CC | ||
- OEM Compatibility: Flow rate, pressure, mounting dimensions, and interfaces perfectly match target engines. No additional modifications required—direct replacement reduces installation costs and risks.
- High-Reliability Sealing: Ceramic seal assembly + sealed bearings effectively prevent coolant leakage, extending service life and reducing maintenance frequency.
- Durable Materials: Cast iron pump housing resists corrosion and impact, suitable for harsh conditions in construction machinery; impeller design balances flow and efficiency
- Compliance: Meets relevant industry standards and Fed. CC (Federal Compliance) requirements, suitable for equipment in compliant markets like North America
- 1006-60T
- 1006-6T
- 1006e-6T
Applicable Equipment Scenarios
- Construction Machinery: Equipment utilizing Perkins 1006 Series engines, including excavators, loaders, bulldozers, and road rollers
- Power Generation Equipment: Perkins 1006 Series diesel generator sets (primary/standby power)
- Industrial Equipment: Compressors, pump units, marine auxiliary engines, etc.
- Agricultural Machinery: Large tractors, harvesters, etc.
Application Advantages
- Maintains stable engine temperature, enhances fuel efficiency, and reduces emissions
- Adapted for continuous high-load operation, minimizing downtime risk
- Direct replacement reduces equipment maintenance time and improves utilization rate
Installation and Usage Precautions
- Clean coolant lines before installation; replace coolant and thermostat (recommended for simultaneous maintenance)
- Tighten mounting bolts to OEM torque specifications to prevent flange leaks
- Bleed air after coolant refill to avoid air locks affecting pump and cooling system efficiency
- Regularly inspect coolant level and condition to prevent pump seal and impeller damage from coolant degradation
1. Which engines does U5MW0160 fit? What old part number does it replace?
Core compatibility with Perkins 1000 Series 6-cylinder diesel engines: 1006-60T, 1006-6T, 1006e-6T, 1006-6TW; directly replaces old part number 1016102. Meets Fed. CC compliance requirements for use in North American compliant equipment.
2. Is it an OEM part?
No, this water pump is an OEM-specification replacement part.
3. How does it differ from models like U5MW0159 or U5MW0156?
These models belong to the Perkins 1000 Series water pump family but differ in engine compatibility, interfaces, or flow specifications. U5MW0160 is specifically designed for 1006 Series 6-cylinder engines and is not interchangeable with other models. Verify the part number against the engine nameplate.
4. What is the pump's structure and key specifications?
Centrifugal integrated assembly featuring a cast iron pump housing, cast aluminum/engineering plastic impeller, ceramic-carbon seal assembly, and sealed maintenance-free bearings. Driven by engine timing gear/belt. Compatible with ethylene glycol-water coolant (meeting Perkins specifications), operating temperature range: -30°C to 120°C. Interfaces and mounting dimensions are fully compatible with OEM specifications, requiring no modifications to Perkins engines.
5. What does Fed. CC compliance specifically refer to?
It denotes compliance with relevant U.S. federal emissions and equipment regulations, ensuring the product meets local standards for sale and use in North America. Applicable for Perkins-powered equipment exported to or operating in North America.
6. What are the key steps before and during installation?
① Pre-installation: Clean coolant lines, replace coolant and thermostat (recommended for simultaneous maintenance); Inspect pump body and flange surfaces for dents/scratches; ensure sealing surfaces are free of contaminants. ② Installation: Tighten bolts to OEM torque specifications to prevent flange leaks. ③ Post-installation: Fill with coolant and bleed air to prevent air locks. Conduct a 30-minute test run to check for leaks, abnormal noises, or temperature irregularities.
7. Do I need to purchase additional gaskets?
Most U5MW0160 assemblies (especially OEM kits) include installation gaskets. Confirm with CWL during procurement to avoid installation delays or leaks due to missing gaskets.
8. What is the recommended maintenance cycle and inspection items for the water pump?
Inspect every 500 operating hours or 6 months (whichever comes first). Inspections include: - Visual check for coolant leaks - Manually rotate the pulley to test bearing smoothness (no binding, excessive axial/radial play) - Check drive belt tension (loose belts cause slippage; tight belts damage bearings) - Regularly replace coolant (per engine manual) to prevent scale and corrosion.
9. What are common water pump failures? How to diagnose them?
Common failures: ① Coolant leakage (seal wear, visible as wet marks on pump body or flange); ② Bearing noise/seizure (sharp whining or heavy rattling during operation); ③ Insufficient flow (engine overheating, poor cooling). Diagnostic methods: Inspect for leakage traces, listen for operational sounds, monitor coolant temperature and system pressure.
10. What is the normal service life of a water pump?
Under proper coolant use, regular maintenance, and normal operating conditions (no high temperatures or contaminant ingress), service life can reach 8,000–10,000 hours. Inspection or replacement is recommended during engine overhauls to prevent unexpected failures causing downtime.
11. What equipment is this water pump suitable for?
Suitable for various equipment utilizing the aforementioned engines: construction machinery (excavators, loaders, bulldozers, etc.), diesel generator sets (primary/standby power), industrial equipment (compressors, pump units, marine auxiliary engines), agricultural machinery (large tractors, harvesters), etc.
12. What usage recommendations apply under high-load or harsh conditions?
① Ensure coolant quality and level meet specifications to prevent overheating and boiling.
② Regularly clean the radiator and piping to prevent blockages.
③ Avoid prolonged idling or overloading the engine to reduce stress on the water pump and cooling system.
④ Tighten all connections to specified torque standards during installation to prevent vibration-induced leaks or bearing damage.